User Manual

QuickSpecs
HPE Smart Array P408e-m SR Gen10 Controller
Standard Features
Page 3
• Background surface scan checks drives during inactive periods and automatically remaps bad
sectors, ensuring data integrity.
• HPE SmartSSD Wear Gauge reports the amount of lifetime remaining on your SSDs.
Fault Recovery
Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure
• Recovery ROM: This feature protects the user from a firmware image corruption by storing a
redundant copy of the firmware image. If the active firmware image becomes corrupt, the
controller will use the redundant firmware image and continue operating.
• On-Line Spares: There is no limit to the number of spare drives that can be installed prior to
drive failure. If a failure occurs, recovery begins with an On-Line Spare and data is
reconstructed automatically.
• DRAM ECC detects and corrects data bit errors
HPE SSD Smart Path
The HPE SSD Smart Path feature included in the Smart Array software stack improves Solid State Disk
(SSD) read performance
by up to 4x. HPE SSD Smart Path chooses the optimum path to the SSD and
accelerates reads for all RAID levels and RAID 0 writes.
HPE Smart Array SR
SmartCache
(o
ptional license)
The HPE Smart Array SR SmartCache feature is a controller-based read and write caching solution in a
DAS environment that caches the most frequently accessed data ("hot" data) onto lower latency SSDs to
dynamically accelerate application w
orkloads. The SmartCache architecture is flexible and supports any
HPE ProLiant
Gen10 HDD for bulk storage and SSD as an accelerator. SmartCache is deployed and
managed using the HPE Smart Storage Administrator (HPE SSA). SmartCache
requires an optional
li
cense (see Related Options section below for more information on the license).
For
additional information please visit:
http://www.hpe.com/servers/smartcache
.
HPE Smart Array SR
Secure Encryption
(o
ptional license)
HPE Smart Array SR Secure Encryption is a Smart Array controller-based data encryption solution that
protects sensitive, mission critical data. This is an enterprise
-class encryption solution for data-at-
rest on
any
drives attached to the HPE Smart Array controllers including data on the controller cache. Secure
Encryption
requires an optional license per server (see Related Options for more information on the
license).
The solution is available for both local and remote key management mode
deployments. Local Key
Management Mode is focused on single server deployment where there is one Master key per controller
that is managed by the user. Remote Key Management Mode is for enterprise wide deployments from
just a few servers to thousands of s
ervers.
FIPS 140
-2 Cryptographic Module Validation
FIPS provides a security assurance level validation for cryptographic modules.
HPE Smart Array P408e-
m
SR Gen10 Controller is a cryptographic module that is currently on the Validation Program FIPS 140-
2
Implementation Under Test List. The Smart Array P408e-m SR Gen10 Controller is expected to
complete FIPS 140
-2 Level 1 Validation in 2018. The National Institute of Standards and Technology
(NIST) issue the FIPS 140
-2 requirements and standards for cryptography modules that include both
hardware and software components.
For more information on please visit: http://www.hpe.com/servers/secureencryption
Warranty
The warranty for this device is 3 years parts only.
Warranty Upgrade Options
• Response - Upgrade on-site response from next business day to same day 4 hours.
• Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days.
• Duration - Select duration of coverage for a period of 1, 3, or 5 years.
• Warranty upgrade options can come in the form of Care Packs, which are sold at the HPE
System level to which this product attaches.