Specifications

6.
Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the
socket (1), as shown in the following figure.
CAUTION: DIMMs and their sockets are keyed for proper installation. To prevent socket or
DIMM damage, align these guides properly when installing DIMMs.
Figure 5-47 Seating the DIMM
7.
Secure the socket levers (2).
8.
For a 6-DIMM workstation configuration, replace the airflow guide (see
Installing the airflow guide
on page 110).
9.
Replace all components that you removed in preparation for component installation.
ENWW
Removing and installing components
119