User guide

Table 2-1 Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT
Workstations (continued)
Heading Option Description
Device Options Enable/disable the following device options:
●
S5 Wake-on-LAN (Enabled/Disabled)
●
Printer Mode (EPP+ECP, Output Only, Bi-Directional)
●
Num Lock State at Power-On (On/Off)
●
Integrated Video
1
(Enabled/Disabled)
●
IGD (Integrated Graphics Device) Memory—Displayed when Integrated Video
is Enabled. Sets the maximum amount of system memory that can be allocated
as graphics memory (32, 64 (default), 128, 256, 512 MB)
1
●
Internal Speaker (Enabled/Disabled)
●
NIC/PXE Option ROM
2
Download (PXE/Disabled)
● SATA RAID Option ROM
2
Download (Enabled/EFI/Disabled)
●
Multi-Processor (Enabled/Disabled)
● Hyperthreading
1
(Disabled/Enabled)
Slot Settings Lets you Enable/Disable Option ROM Download for each slot. Selective disabling
of Option ROM downloads can help manage limited Option ROM space. Limit
PCIe Frequency to Gen1, Gen2, Gen3. Runs slot at Gen1, Gen2, or Gen3
frequency.
Management
Operations
Lets you set the following AMT (Intel Active Management Technology) configuration
options:
●
AMT (Enabled/Disabled)—Allows for remote discovery, repair and protection
of networked workstations. Enabling the AMT function also enables the
Network Controller (required for AMT to function correctly).
● Unconfigure AMT/ME (Disabled/Enabled)
2
—Restores AMT/ME defaults.
When you save and exit after enabling this option, you will be prompted to
complete the process upon restart. A Setup Password (even if one is set) does
not need to be entered to complete the process.
NOTE: Information about Intel AMT can be found at
www.intel.com.
●
Hide Un-configure ME Confirmation Prompt—(Enabled/Disabled).
●
WatchDog Timer (Enabled/Disabled)—OS and BIOS WatchDog Timers can
be set independently (in minutes):
◦
OS WatchDog Timer—Sets the OS WatchDog Timer.
◦
BIOS WatchDog Timer—Sets the BIOS WatchDog Timer.
Option ROM Launch
Policy
●
PXE Option ROMs—(Legacy, UEFI Only/Do Not Launch)
●
StorageOption ROMs—(Legacy, UEFI Only/Do Not Launch)
●
Video Options—(Legacy, UEFI Only)
1
*Available on selected models.
2
*These options should be used by advanced users only.
Computer Setup (F10) Utility
51