User guide

Configuring system BIOS
To set up a RAID configuration, the emulation mode must be set to RAID+AHCI in Computer Setup
(F10) Utility. This is the default setting. If the mode has been changed, follow these steps to reinstate it.
1. During startup, press F10 to enter Computer Setup (F10) Utility. Use the arrow keys to navigate
and select options.
2. Select a language from the list, and then press Enter.
3. Select Storage > Storage Options, then press Enter.
4. Select SATA Emulation > RAID+AHCI, then press F10 to accept the new settings.
5. Select Advanced > Power-On Options, then press Enter.
6. Select POST Messages > Enable, and then press F10 to accept the new settings.
7. Select Advanced > Device Options, then press Enter.
8. Select SATA RAID Option ROM Download, then press Enter.
9. Select Enable, then press F10 to accept the new settings.
10. Select File > Save Changes and Exit, then press Enter.
11. Press Enter to accept the changes.
170 Appendix B Configuring RAID devices