Specifications

Optical disk drive (mini-tower configuration)
This section describes how to remove and install an optical disk drive in the computer mini-tower
configuration. For instructions on how to remove and install an optical disk drive in the computer desktop
configuration, see
Optical disk drive (desktop configuration) on page 84.
Removing an optical disk drive from the optical bay (mini-tower configuration)
1. Disconnect power from the computer (see Predisassembly procedures on page 70).
2. Remove the side access panel (see
Removing the side access panel on page 73).
3. Remove the front bezel (see
Removing the front bezel on page 76).
4. Disconnect the data (1) and power (2) cables from the optical disk drive as shown in the following
figure.
Figure 5-10 Disconnecting optical disk drive cables
ENWW Removing and installing components 79