Specifications

Installing a DIMM
To install the DIMM:
1. Disconnect power from the computer (see
Predisassembly procedures on page 70).
CAUTION: To prevent possible electrical damage to the DIMMs, power off the computer and
unplug the power cord from the AC power outlet before removing or installing memory. The
computer will not recognize the memory changes if the DIMM is damaged.
2. Remove the side access panel (see Removing the side access panel on page 73).
3. Push gently outward on the DIMM socket levers as shown in the following figure.
Figure 5-27 Opening DIMM socket levers
ENWW Removing and installing components 95