Specifications

Removing a DIMM
To remove a DIMM:
1. Disconnect power from the computer (see
Predisassembly procedures on page 70).
CAUTION: To prevent possible electrical damage to the DIMMs, power off the computer and
unplug the power cord from the AC power outlet before removing or installing memory. The
computer will not recognize the memory changes if the DIMM is damaged.
2. Remove the side access panel (see Removing the side access panel on page 73).
3. Push gently outward on the DIMM socket levers (1) as shown in the following figure.
Figure 5-26 Removing a DIMM
4. Lift the DIMM straight up (2) and out of the socket, then store the DIMM in an antistatic bag.
94 Chapter 5 Replacing components ENWW