User manual

854285-001 4
3. Align the rear cover with the computer and press it
down until it snaps into place (1). Replace the two
Phillips screws (2), and then replace the screw covers
(3).
4. Position the top of the stand on the computer (1), and
then replace the four hex screws (2). Rotate the stand
downward (3).
5. Plug the power cord and any additional cables into the
back of the computer.
6. Press the power button to turn on the computer.
© Copyright 2016 HP Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: May 2016
PRI NTER: Repl ac e thi s bo x with Pr int ed- I n (PI )
St at ement(s) as p er sp ec.
NOTE: This box is simply a placeholder. PI
St at ement(s) do n ot ha ve to fit ins id e the b ox
but sh ould be pl aced in t hi s area .