User manual

854285-001 3
8. Touch the replacement memory module bag to the metal
of the computer, and then remove the replacement
memory module from the bag.
Replacing the memory module
1.
A
li
g
n the notched ed
g
e of the module with the tab in the
slot, and then press the module into the slot at an angle
until it is seated (1). Press down on the module until the
side retention clips snap into place (2). NOTE: Memory
modules are notched to prevent incorrect insertion.
2. Position the system board cover over the system board
(1), and then replace the five Phillips screws (2).