User Manual

Using Auto-Sleep Mode
The display supports an OSD (On-screen display) option called Auto-Sleep Mode that allows you to enable or
disable a reduced power state for the display. When Auto-Sleep Mode is enabled (enabled by default), the
display will enter a reduced power state when the host PC signals low power mode (absence of either
horizontal or vertical sync signal).
Upon entering this reduced power state sleep mode, the display screen is blanked, the backlight is turned o
and the power LED indicator turns amber. The display draws less than 0.5W of power when in this reduced
power mode. The display will wake from the sleep mode when the host PC sends an active signal to the
display (for example, if you activate the mouse or keyboard).
You can disable the Auto-Sleep Mode in the OSD. Press one of the ve front bezel Functional buttons to
activate the buttons, and then press the Menu button to open the OSD. In the OSD press Power Control >
Auto-Sleep Mode > Disable.
24 Chapter 4 Operating the display