System information

5–24 338611-001 Service and Technical Reference Guide, xw3100

Removal and Replacement Procedures

5.12 Power Switch Assembly

1. Prepare the workstation for disassembly (Section 5.1).

2. Remove the workstation access panel (Section 5.5).

3. Disconnect the power switch/LED cable from the system board.

4. Carefully cut the cable tie that secures the power switch cable to the power supply cable

cable bundle.

CAUTION: Be careful when cutting the cable tie not to cut any cables.

5. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the

switch assembly out of the chassis 2.

To install the power switch assembly, reverse the removal procedure.