Troubleshooting guide

Item Symbol Description Item Symbol Description
NOTE: Might not be available on all
workstations.
8 Parallel connector *
NOTE: Might not be available on all
workstations.
17 DMS–59 high density graphics connector
NOTE: Might not be available on all
workstations.
9 SVGA Monitor Connector
* Refer to the Service and Technical Reference Guide for your workstation for specific rear panel component information.
The rear panel connectors are labeled with industry-standard icons and colors to assist you in connecting your peripheral
devices.
Additional rear panel components can include those shown in the examples in Figure 2–5. Your
workstation has some combination of these components, depending upon workstation model and
configuration.
Figure 2-5 Additional rear panel component examples
xw4000 Series xw6000 Series xw8000/xw9000 Series
Item Description
1 Built-in Self Test (BIST) LED
2 Universal chassis clamp opening
3 Cable lock slot
4 Padlock loop
5 Access panel key
NOTE: Not all workstations models have the key lock.
6 PCI expansion slot access openings (each slot opening typically covered with blank filler panel when not use).
Table 2-2 Rear panel connector and control description (continued)
ENWW Front and rear panel components 13