User guide

set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set the Host Operating Environment
dlnkmgr [-s host-name -u user-name -p password] set
{-lb on -lbtype {exrr|exlio|exlbk|vmwmru|vmwrr}
|-iem {on [-intvl error-monitoring-interval] [-iemnum number-
of-times-error-is-to-occur]|off}
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
}
[-s]
To Set the Remote Management Client Operating Environment
dlnkmgr -l set
{-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss] [a] [ca] [all]]|off}
|-pstv {on|off}
}
[-s]
To Display the Format of the Set Operation
To display the format of the operation for both a host and remote
management client:
dlnkmgr set
-help
To display the format of the operation for a host:
dlnkmgr -s
host-name -u user-name -p password set
-help
To display the format of the operation for a remote management client:
dlnkmgr -l set
-help
6-16
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide