User Guide

Setting up the monitor
Installing the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity of
color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal condition.
1. Remove the stand/base assembly, and then lift the monitor from the box and place it face down on a at
surface.
2. Position the stand over the base, and press down rmly to lock it in place.
3. Insert the two tabs on the stand into the bracket on the back of the display head, and press until they
click into place.
Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
Setting up the monitor 5