Quick Specs

QuickSpecs
HP ProDisplay P223 21.5-inch Monitor
HP ProDisplay P223 21.5-inch Monitor Head Only
Change Log
c05354161 — DA 15823 — Worldwide — Version 3 — January 27, 2017
Page 6
RoHS Compliance
HP, Inc. is committed to compliance with all applicable environmental laws and regulations,
including the European Union Restriction of Hazardous Substances (RoHS) Directive. HP’s goal is
to exceed compliance obligations by meeting the requirements of the RoHS Directive on a
worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to
levels below legal limits) for all HP electronic products subject to the RoHS Directive, except
where it is widely recognized that there is no technically feasible alternative (as indicated by an
exemption under the EU RoHS Directive).
Material Usage
This product does not contain any of the following substances in excess of regulatory limits
(refer to the HP General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf):
 Asbestos
 Certain Azo Colorants
 Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
 Cadmium
 Chlorinated Hydrocarbons
 Chlorinated Paraffins
 Formaldehyde
 Halogenated Diphenyl Methanes
 Lead carbonates and sulfates
 Lead and Lead compounds
 Mercuric Oxide Batteries
 Nickel – finishes must not be used on the external surface designed to be frequently
handled or carried by the user.
 Ozone Depleting Substances
 Polybrominated Biphenyls (PBBs)
 Polybrominated Biphenyl Ethers (PBBEs)
 Polybrominated Biphenyl Oxides (PBBOs)
 Polychlorinated Biphenyl (PCB)
 Polychlorinated Terphenyls (PCT)
 Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaging has
been voluntarily removed from most applications.
 Radioactive Substances
 Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging
HP follows these guidelines to decrease the environmental impact of product packaging:
 Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in
packaging materials.
 Eliminate the use of ozone-depleting substances (ODS) in packaging materials.
 Design packaging materials for ease of disassembly.
 Maximize the use of post-consumer recycled content materials in packaging materials.
 Use readily recyclable packaging materials such as paper and corrugated materials.
 Reduce size and weight of packages to improve transportation fuel efficiency.
 Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.