Specifications

Locate system board drive connections

Adding a new drive may require that you make new connections from the drive to the system board.

Refer to the following illustration and table to identify the system board drive connectors.

Figure 5-9 System board drive connections

Table 5-5 System board drive connections

System Board Connector System Board Label Color

1 Media Card Reader MEDIA gray

2 SATA4 (eSATA) eSATA black

3 SATA2 SATA2 black

4 SATA1 SATA1 blue

5 SATA0 SATA0 blue

●

The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA

connector on the system board labeled SATA0.

●

Connect a secondary hard drive to SATA..

●

Connect SATA optical drives to the black SATA2 connector.

●

Connect an optional eSATA adapter cable to the black ESATA connector on the system board.

●

Connect a media card reader USB cable to the USB connector on the system board labeled

MEDIA. If the media card reader has a 1394 port, connect the 1394 cable to the 1394 PCI card.

NOTE: The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.

ENWW

Removing and installing components