Specifications

3. Remove the front bezel (see Removing the access panel on page 64).
4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 5-5 Retrieving the front bezel security screw
5. Replace the front bezel.
6. Install the security screw next to the middle front bezel release tab to secure the front bezel in
place.
Figure 5-6 Installing the front bezel security screw
7. Replace the access panel.
8. Reconnect all connections and equipment listed in the
Predisassembly procedures on page 62.
66 Chapter 5 Replacing components ENWW