Specifications

PWRCMD—Power command, P2
5GND Black
6PSU_DETECT (empty)
CPU power cable, P3 Pin Color Signal
1BLK GND
2BLK GND
3 BRN 12V CPU
4 BRN 12V CPU
CAUTION: Never connect the PCIe power cable to the system board when
power is on. If you do so, the system board can be damaged and the warranty
voided. Ensure that you can tell which power cable connects to the PCIe x16
graphics card and which power cable connects to the system board. These two
cables have different pin counts and different colors. The PCIe power cable has a
6-pin black connector, and the CPU power cable has an 4-pin white connector.
To see a picture of the PCIe cable and where it must be connected, see
Removing
and installing expansion cards on page 116.
Internal USB 1 2x5 Pin Signal
1 +5V
2 +5V
3USB6#
4USB9#
CAUTION: Possible equipment damage.
The 2x5 connector can be mated to either a wide 2x5
option cable connector or a narrow 1x5 option cable
connector.
To prevent damage to the connectors, always connect
a narrow 1x5 option cable connector to pins 1,3,5,
and 7 only of the 2x5 connector (pin 9 is not keyed on
the connector).
5USB6
6USB9
7GND
8GND
9(not keyed)
10 DETECT
ENWW 175