Specifications

6. Align the PCIe card keyway with the slot key, push the retention clamp (1), and then firmly seat the
card in the slot (2).
●
If the retention clamp does not close, ensure that all cards are properly seated, and then try
again.
●
If required by the card, connect the auxiliary power cable to the card (not illustrated).
Figure 5-75 Inserting the expansion card
7. Replace the access panel (see Installing the access panel on page 64).
8. Restore all connections and equipment that you removed during the
Predisassembly procedures
on page 62.
ENWW
Removing and installing components
119