Specifications

5. Push the retention latch (1), and then carefully lift the card from the chassis (2).
Figure 5-72 Removing the expansion card
6. Push the retention latch and install an expansion slot cover if you do not intend to replace the
card.
7. Replace the access panel (see
Installing the access panel on page 64).
8. Restore all connections and equipment that you removed during the
Predisassembly procedures
on page 62.
Installing an expansion card
Visit http://www.hp.com/go/quickspecs to learn which graphics cards are supported in the computer,
how much memory each graphics card includes, and graphics card power requirements.
To install an expansion card:
1. Prepare the computer for servicing by following the
Predisassembly procedures on page 62.
CAUTION: Failure to follow the predisassembly procedures can result in equipment damage or
data loss.
2. Remove the access panel (see Removing the access panel on page 64).
ENWW
Removing and installing components
117