QuickSpecs

System Board
System Board Form
Factor
BTX 21.2mm x 26.7mm
Processor Socket Single LGA 1155
CPU Bus Speed DMI
Chipset Intel® PCH C206
Memory Expansion
Slots
4 DDR3 memory slots
Memory Type
Supported
DDR3, UDIMM (Unbuffered), ECC & non-ECC
Memory Modes Non-Interleaved for single channel. Interleaved when both channels are populated.
Memory Speed
Supported
1333MHz DDR3
Memory Protection ECC available on data, parity on address and command
Memory
Maximum Memory 16GB
MEMORY LOADING CONFIGURATIONS
Memory Configuration
(Supported)
1GB, 2GB and 4GB ECC and non-ECC unbuffered DIMMs are supported, but not if mixed.
PCI Express
Connectors
1 PCI Express Gen2 x16 LP slot (x16 electrical/x16 mechanical)
1 PCI Express Gen2 x16 LP slot (x4 electrical/x16 mechanical)
1 PCI Express Gen2 x1 LP slot (x1 electrical/x1 mechanical)
NOTE: LP = low profile
NOTES: In the PCIe x16 (x16 electrical/x16 mechanical) Gen 2 slot, if it is not being used for a
graphics card, only cards certified as After Market Options for this platform are supported.
PCI Connectors (5.0V) 1 PCI LP slot
Supported Drive
Interfaces
SATA Integrated (4) Serial ATA interfaces (2x 6Gb/s SATA in blue, 2x 3Gb/s
SATA in black). One port can optionally be used for eSATA.
NOTE: the Z210 SFF supports a maximum of two SATA/SSD drives
only. RAID 0 and 1 supported. (Factory integrated RAID is Microsoft
Windows only).
Serial Attached SCSI None
Integrated RAID NOTE: Requires identical hard drives (speeds, capacity, interface)
QuickSpecs
HP Z210 SFF Workstation
System Technical Specifications
DA - 13873 Worldwide QuickSpecs — Version 7 — 7.1.2011 Page 12