Specifications

System BIOS and Resources
HP Setup Program
Chapter 4 55
Security Menu
Table 4-3 describes the fields available in the Setup program Security
menu.
Table 4-3 Security Menu
Field Description
Administrator
Password
This field is view-only. It tells you whether there is
an Administrator password set.
Set
Administrator
Password
This password prevents unauthorized access to this
your Workstations Setup program. This password
can also be used to start the computer when the
power-on password is Enabled. You must set an
administrator password before you can set a user
password.
Clear All
Passwords
Selecting this field and pressing Enter clears both the
User and Administrator passwords.
User
Password
This field is view-only. It tells you whether there is a
User password set.
Set User
Password
If an administrator password has been set, you can
enter this field to set a user password. The User
password prevents unauthorized access to this your
Workstations Setup program. This password can also
be used to start the computer when the power-on
password is Enabled.
Power-On
Password
If Enabled, you must enter a password before the
Workstation boots. You can only enable this field if
an administrator password has been set.
Start from
Floppy
If Disabled, unauthorized use of the floppy disk drive
to start the computer is prevented. (The drive is still
available for reading and writing data.)
Start from
CD-ROM
If Disabled, unauthorized use of the CD-ROM to start
the computer is prevented. (The drive is still
available for reading data.)