Specifications

Troubleshooting
Solving Hardware Problems
Chapter 11 211
Clearing the Administrator Password
To clear the Administrator password:
1. Turn off the Workstation and remove the cover.
2. Set switch 1 on the system board switch block to ON.
3. Replace the Workstation cover.
4. Turn on the Workstation and press ESC when prompted to see the
summary page.
5. When a message appears indicating that the passwords have been
cleared, turn off the Workstation and remove the cover. You must
press the power button for 5 seconds to turn off system.
6. Set switch 1 on the system board block back to OFF.
7. Replace the Workstation cover.
8. If you want to set new passwords, follow the instructions given in
“Setting Passwords” on page 224.