Specifications

Installing or Replacing Parts and Accessories
System Board
Chapter 10 185
Figure 10-25 System Board Assembly Screws
12.Unscrew, but do not remove, the three pull-back screws shown in
Figure 10-26.
Figure 10-26 Pull-Back Screws and SCSI Hex Screws
13.Remove the screws that attach the external SCSI connector to the
rear panel as shown in Figure 10-26.
14.Remove the system board, being careful not to damage the
Workstation's cables and rear panel connectors.
System Board
Assembly Screw
System Board
AssemblyScrew
(fold external
SCSI cable
down over the
system board to
access)
Pull-Back Screws
SCSI Hex Screws