Specifications

Installing or Replacing Parts and Accessories
Floppy Disk Drive
Chapter 10 181
Installing the Floppy Disk Drive
1. Add the guide rails to the new drive. Insert the guide rail labeled “L”
on the left-hand side (cable connectors facing towards you and
positioned at the top), and the guide rail “R” on the right-hand side of
the floppy disk drive.
2. Align the guide rails on both sides of the drive with the internal shelf
guides, then slide the drive until it clicks into position.
3. Connect the power and floppy data cables to the new drive. The
connectors are shaped to go in one way only.
4. Replace the front bezel and Workstation’s cover (refer to “Replacing
the Cover and Front Bezel” on page 148).
5. Reconnect all the power and telecommunications cables.