Specifications

Installing or Replacing Parts and Accessories
Chassis Beam Assembly
Chapter 10 153
Installing the Chassis Beam Assembly
To install the chassis beam assembly:
1. Hook the chassis beam assembly to the left side of the chassis and
rotate it down over the MEC and the graphics card making sure the
MEC and graphics card retainer clips are centered on the cards as
shown in Figure 10-6 and Figure 10-7.
CAUTION Make sure the retaining clips slide easily over the cards, or the clips
may put undue pressure on the card connectors.
2. Replace the screw that holds the chassis beam assembly in place.
Figure 10-6 MEC Retainer Clip
Retaining clip
on MEC.