Command Reference Guide

72 CHAPTER 4: PORT COMMANDS
See Also
 clear port type on page 65
 set port on page 80
 set port name on page 82
 set port negotiation on page 83
 set port speed on page 85
 set port type ap on page 87
 set port type wired-auth on page 91
monitor port
counters
Displays and continually updates port statistics.
Syntax —
monitor port counters
[octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats | transmit-etherstats]
 octets — Displays octet statistics first.
 packets — Displays packet statistics first.
 receive-errors — Displays errors in received packets first.
 transmit-errors — Displays errors in transmitted packets first.
 collisions — Displays collision statistics first.
 receive-etherstats — Displays Ethernet statistics for received
packets first.
 transmit-etherstats — Displays Ethernet statistics for transmitted
packets first.
Media Link type:
10/100BaseTX — 10/100BASE-T.
GBIC — 1000BASE-SX or 1000BASE-LX GBIC.
1000BaseT — 1000BASE-T.
No connector — GBIC slot is empty.
Table 14 Output for display port status (continued)
Field Description