Command Reference Guide

534 CHAPTER 17: RF DETECTION COMMANDS
Usage — The permitted vendor list applies only to the WX switch on
which the list is configured. WX switches do not share permitted vendor
lists.
Examples — The following command adds an entry for clients whose
MAC addresses start with aa:bb:cc:
WX-1200# set rfdetect vendor-list client aa:bb:cc:00:00:00
success: MAC aa:bb:cc:00:00:00 is now in client vendor-list.
The trailing 00:00:00 value is required.
See Also
 clear rfdetect vendor-list on page 515
 display rfdetect vendor-list on page 525
display rfdetect
attack-list
Displays information about the MAC addresses in the attack list.
Syntax —
display rfdetect attack-list
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following example shows the attack list on WX switch:
WX1200# display rfdetect attack-list
Total number of entries: 1
Attacklist MAC Port/Radio/Chan RSSI SSID
----------------- ----------------- ------ ------------
11:22:33:44:55:66 dap 2/1/11 -53 rogue-ssid
See Also
 clear rfdetect attack-list on page 512
 set rfdetect attack-list on page 528