Command Reference Guide

set rfdetect black-list 529
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — The attack list applies only to the WX switch on which the list is
configured. WX switches do not share attack lists.
Examples — The following command adds MAC address
aa:bb:cc:44:55:66 to the attack list:
WX-1200# set rfdetect attack-list 11:22:33:44:55:66
success: MAC 11:22:33:44:55:66 is now in attacklist.
See Also
 clear rfdetect attack-list on page 512
 display rfdetect attack-list on page 534
set rfdetect
black-list
Adds an entry to the client black list. The client black list specifies clients
that are not allowed on the network. MSS drops all packets from the
clients on the black list.
Syntax —
set rfdetect black-list mac-addr
 mac-addr — MAC address you want to place on the black list.
Defaults — The client black list is empty by default.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — In addition to manually configured entries, the list can contain
entries added by MSS. MSS can place a client in the black list due to an
association, reassociation or disassociation flood from the client.
The client black list applies only to the WX switch on which the list is
configured. WX switches do not share client black lists.