Command Reference Guide

display rfdetect visible 527
History —Introduced in MSS Version 3.0. Vendor, Type, and Flags fields
added in Version 4.0.
Usage — If a 3Com radio is supporting more than one SSID, each of the
corresponding BSSIDs is listed separately.
To display rogue information for the entire Mobility Domain, use the
display rfdetect mobility-domain command on the seed switch.
Examples — The following command displays information about the
rogues detected by radio 1 on MAP port 3:
WX1200# display rfdetect visible ap 3 radio 1
Total number of entries: 104
Flags: i = infrastructure, a = ad-hoc
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
Transmit MAC Vendor Type Ch RSSI Flags SSID
----------------- ------- ----- --- ---- ------ --------------------------------
00:07:50:d5:cc:91 Cisco intfr 6 -60 i----w r27-cisco1200-2
00:07:50:d5:dc:78 Cisco intfr 6 -82 i----w r116-cisco1200-2
00:09:b7:7b:8a:54 Cisco intfr 2 -54 i-----
00:0a:5e:4b:4a:c0 3Com intfr 11 -57 i----- public
00:0a:5e:4b:4a:c2 3Com intfr 11 -86 i-t1-- 3Comwlan
00:0a:5e:4b:4a:c4 3Com intfr 11 -85 ic---- 3Com-ccmp
00:0a:5e:4b:4a:c6 3Com intfr 11 -85 i-t--- 3Com-tkip
00:0a:5e:4b:4a:c8 3Com intfr 11 -83 i----w 3Com-voip
00:0a:5e:4b:4a:ca 3Com intfr 11 -85 i----- 3Com-webaaa
...
Table 99 describes the fields in this display.
Table 99 display rfdetect visible Output
Field Description
Transmit MAC MAC address the rogue device that sent the 802.11 packet
detected by the MAP radio.
Vendor Company that manufactures or sells the rogue device.