Command Reference Guide

display rfdetect mobility-domain 521
display rfdetect
mobility-domain
Displays the rogues detected by all WX switches in the Mobility Domain
during RF detection scans.
Syntax —
display rfdetect mobility-domain
[ssid ssid-name | bssid mac-addr]
 ssid ssid-name — Displays rogues that are using the specified SSID.
 bssid mac-addr — Displays rogues that are using the specified
BSSID.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. bssid and ssid options, Vendor,
Type, and Flags fields added in MSS Version 4.0.
Usage — This command is valid only on the seed switch of the Mobility
Domain. To display rogue information for an individual switch, use the
display rfdetect data command on that switch.
Examples — The following example displays information for all SSIDs
detected in the Mobility Domain:
WS1200# display rfdetect mobility-domain
Total number of entries: 194
Flags: i = infrastructure, a = ad-hoc, u = unresolved
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID Vendor Type Flags SSID
----------------- ------------ ----- ------ --------------------------------
00:07:50:d5:cc:91 Cisco intfr i----w r27-cisco1200-2
00:07:50:d5:dc:78 Cisco intfr i----w r116-cisco1200-2
00:09:b7:7b:8a:54 Cisco intfr i-----
00:0a:5e:4b:4a:c0 3Com intfr i----- public
00:0a:5e:4b:4a:c2 3Com intfr i----w 3Comwlan
00:0a:5e:4b:4a:c4 3Com intfr ic---- 3Com-ccmp
00:0a:5e:4b:4a:c6 3Com intfr i----w 3Com-tkip
00:0a:5e:4b:4a:c8 3Com intfr i----w 3Com-voip
00:0a:5e:4b:4a:ca 3Com intfr i----- 3Com-webaaa
...