Command Reference Guide

display rfdetect countermeasures 517
display rfdetect
countermeasures
Displays the current status of countermeasures against rogues in the
Mobility Domain.
Syntax —
display rfdetect countermeasures
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. As of Version 4.0, output no
longer lists rogues for which countermeasures have not been started.
Usage — This command is valid only on the seed switch of the Mobility
Domain.
Examples — The following example displays countermeasures status for
the Mobility Domain:
WX1200# display rfdetect countermeasures
Total number of entries: 190
Rogue MAC Type Countermeasures WX-IPaddr Port/Radio
Radio Mac /Channel
----------------- ----- ------------------ --------------- -------------
00:0b:0e:00:71:c0 intfr 00:0b:0e:44:55:66 10.1.1.23 dap 4/1/6
00:0b:0e:03:00:80 rogue 00:0b:0e:11:22:33 10.1.1.23 dap 2/1/11
...
Table 95 describes the fields in this display.
Table 95 display rfdetect countermeasures Output
Field Description
Rogue MAC BSSID of the rogue.
Type Classification of the rogue device:
 rogue—Wireless device that is on the network but is not
supposed to be on the network.
 intfr—Wireless device that is not part of your network
and is not a rogue, but might be causing RF interference
with MAP radios.
 known—Device that is a legitimate member of the
network.