Command Reference Guide

set banner motd 49
Self-signed cert for admin is
-----BEGIN CERTIFICATE-----
MIICUzCCAbygAwIBAgICA+cwDQYJKoZIhvcNAQEEBQAwNjELMAkGA1UEBhMC
VVMx
CzAJBgNVBAgTAkNBMRowGAYDVQQDFBF0ZWNocHVic0B0cnB6LmNvbTAeFw0w
MzA0
...
Lm8wmVYLxP56MpCUAm9O8C2foYgOY40=
-----END CERTIFICATE-----
Save the configuration changes:
WX-1200# save config
success: configuration saved.
See Also
 crypto generate key on page 451
 crypto generate self-signed on page 454
 save config on page 557
 set interface dhcp-client on page 144
 set vlan port on page 110
set banner motd Configures the banner string that is displayed before the beginning of
each login prompt for each CLI session on the WX switch.
Syntax —
set banner motd ^text^
 ^ — Delimiting character that begins and ends the message.
 text — Up to 2000 alphanumeric characters, including tabs and
carriage returns, but not the delimiting character (^). The maximum
number of characters is approximately 24 lines by 80 characters.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Type a caret (^), then the message, then another caret.