Command Reference Guide
480 CHAPTER 15: 802.1X MANAGEMENT COMMANDS
Examples — Type the following command to reset the wired
authentication port control:
WX4400# clear dot1x port-control
success: change accepted.
See Also
display dot1x on page 483
set dot1x port-control on page 490
clear dot1x
quiet-period
Resets the quiet period after a failed authentication to the default setting.
Syntax —
clear dot1x quiet-period
Defaults — The default is 60 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the 802.1X quiet
period to the default:
WX4400# clear dot1x quiet-period
success: change accepted.
See Also
display dot1x on page 483
set dot1x quiet-period on page 491