Command Reference Guide

478 CHAPTER 15: 802.1X MANAGEMENT COMMANDS
clear dot1x
bonded-period
Resets the Bonded Auth period to its default value.
Syntax — clear dot1x bonded-period
Defaults — The default bonded authentication period is 0 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the Bonded period to its default, type the following
command:
WX4400# clear dot1x bonded-period
success: change accepted.
See Also
 display dot1x on page 483
 set dot1x bonded-period on page 487
Reauthentication, cont. clear dot1x reauth-max on page 481
set dot1x reauth-period on page 493
clear dot1x reauth-period on page 481
Retransmission set dot1x max-req on page 489
clear dot1x max-req on page 479
Quiet Period and Timeouts set dot1x quiet-period on page 491
clear dot1x quiet-period on page 480
set dot1x timeout auth-server on page 493
clear dot1x timeout auth-server on
page 482
set dot1x timeout supplicant on page 494
clear dot1x timeout supplicant on page 482
Settings, Active Clients, and
Statistics
display dot1x on page 483
Table 86 802.1X Commands by Usage (continued)
Type Command