Command Reference Guide

460 CHAPTER 13: CRYPTOGRAPHY COMMANDS
See Also
 crypto ca-certificate on page 448
 display crypto certificate on page 460
display crypto
certificate
Displays information about one of the cryptographic certificates installed
on the WX switch.
Syntax —
display crypto certificate {admin | eap | webaaa}
 admin — Displays information about the administrative certificate that
authenticates the WX switch to 3WXM or Web Manager.
 eap — Displays information about the EAP certificate that
authenticates the WX switch to 802.1X supplicants (clients).
 webaaa — Displays information about the WebAAA certificate that
authenticates the WX switch to WebAAA clients.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must have generated a self-signed certificate or obtained a
certificate from a certificate authority before displaying information about
the certificate.
Examples — To display information about a cryptographic certificate,
type the following command:
WX4400# display crypto certificate eap
Table 84 describes the fields of the display.
Issuer Certificate authority that issued the certificate or
signature.
Validity Time period for which the certificate is valid.
Table 83 display crypto ca-certificate Output (continued)