Command Reference Guide

46 CHAPTER 3: SYSTEM SERVICE COMMANDS
history Displays the command history buffer for the current CLI session.
Syntax —
history
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — To show the history of your session, type the following
command:
WX4400> history
Show History (most recent first)
--------------------------------
[00] display config
[01] display version
[02] enable
See Also
 clear history on page 38
set auto-config Enables a WX switch to contact a 3Com Wireless Switch Manager server
for its configuration.
Syntax —
set auto-config {enable | disable}
 enable — Enables the switch to contact a 3Com Wireless Switch
Manager server to request a configuration.
 disable — Disables the auto-config option.
Defaults — The auto-config option is automatically enabled on an
unconfigured WXR100 when the Fn switch is pressed during power on.
However, auto-config is disabled by default on other models.
Access — Enabled.
History — Introduced in MSS Version 4.0.