Command Reference Guide

set service-profile auth-fallthru 353
The fallthru method is a service profile parameter, and applies to all
radios within the radio profiles that are mapped to the service profile.
Syntax —
set service-profile name auth-fallthru
{last-resort | none | web-portal}
 last-resort — Automatically authenticates the user and allows
access to the SSID requested by the user, without requiring a
username and password.
 none — Denies authentication and prohibits the user from accessing
the SSID.
The authentication method none you can specify for administrative
access is different from the fallthru authentication type none, which
applies only to network access. The authentication method none allows
access to the WX switch by an administrator. The fallthru authentication
type none denies access to a network user. (See “set service-profile
auth-fallthru” on page 352.)
 web-portal — Serves the user a web page from the WX switch’s
nonvolatile storage for secure login to the network.
Defaults — The default fallthru authentication type is web-portal.
If a username does not match a userglob in an authentication rule for the
SSID requested by the user, the WX switch that is managing the radio the
user is connected to redirects the user to a web page located on the WX
switch. The user must type a valid username and password on the web
page to access the SSID.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option
web-portal renamed
to
web-portal in MSS Version 4.0.
Usage — The last-resort fallthru authentication type allows any user to
access any SSID managed by the service profile. This method does not
require the user to provide a username or password. Use the last-resort
method only if none of the SSIDs managed by the service profile require
secure access.