Command Reference Guide

350 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
set radio-profile
short-retry
Changes the short retry threshold for the MAP radios in a radio profile.
The short retry threshold specifies the number of times a radio can send a
short unicast frame without receiving an acknowledgment.
Syntax —
set radio-profile name short-retry threshold
 name — Radio profile name.
 threshold — Number of times the radio can send the same short
unicast frame. You can enter a value from 1 through 15.
Defaults — The default short unicast retry threshold for MAP radios is 5
attempts.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command
.
Examples — The following command changes the short retry threshold
for radio profile rp1 to 3:
WX4400# set radio-profile rp1 short-retry 3
success: change accepted.
See Also
 display radio-profile on page 298
 set radio-profile mode on page 342
 set radio-profile long-retry on page 339
set radio-profile
wmm
Disables or reenables Wi-Fi Multimedia (WMM) on the MAP radios in a
radio profile.
Syntax —
set radio-profile name wmm {enable | disable}
 name — Radio profile name.
 enable — Enables WMM.
 disable — Disables WMM.