Command Reference Guide

324 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
See Also
 clear {ap | dap} radio on page 272
 display {ap | dap} config on page 277
 set {ap | dap} radio radio-profile on page 324
 set radio-profile mode on page 342
set {ap | dap} radio
radio-profile
Assigns a radio profile to a MAP radio and enables or disables the radio.
Syntax — set {ap port-list | dap {dap-num | auto}} radio {1
| 2} radio-profile name mode {enable | disable}
 ap port-list — List of ports.
 dap dap-num — Number of a Distributed MAP.
 dap auto — Sets the radio profile for radios configured by the MAP
configuration template. (See set dap auto on page 306.)
 radio 1 — Radio 1 of the MAP.
 radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
 radio-profile name — Radio profile name of up to 16 alphanumeric
characters, with no spaces.
 mode enable — Enables radios on the specified ports with the
parameter settings in the specified radio profile.
 mode disable — Disables radios on the specified ports.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option
auto added for
configuration of the MAP configuration template in MSS Version 4.0 .
Usage — When you create a new profile, the radio parameters in the
profile are set to their factory default values.
To enable or disable all radios that use a specific radio profile, use set
radio-profile.