Command Reference Guide

316 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
 radio 1 — Radio 1 of the MAP.
 radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models or to the AP8750.)
 antennatype {ANT1060 | ANT1120 | ANT1180 | internal} —
802.11b/g external antenna models:
 ANT1060 — 60° 802.11b/g antenna
 ANT1120 — 120° 802.11b/g antenna
 ANT1180 — 180° 802.11b/g antenna
 internal — uses the internal antenna instead
 antennatype {ANT5060 | ANT5120 | ANT5180 | internal} —
802.11a external antenna models:
 ANT5060 — 60° 802.11a antenna
 ANT5120 — 120° 802.11a antenna
 ANT5180 — 180° 802.11a antenna
 internal — uses the internal antenna instead
 antennatype {ANT3C591 | ANT3C592 | ANT3C597 | ANT3C598 |
internal}
— 802.11a/b/g dual-mode external antenna models:
 ANT3C591 — High gain omni 802.11a/b/g antenna
 ANT3C592 — Ceiling 802.11a/b/g antenna
 ANT3C597 — Hallway 802.11a/b/g antenna
 ANT3C598 — Panel 802.11a/b/g antenna
 internal — uses the internal antenna instead
All radios use the internal antenna by default. (The MAP-262 802.11b/g
radio does not have an internal antenna, and uses model ANT1060 by
default.)
Access — Enabled.
History — Introduced in MSS Version 3.0. Model numbers added for
802.11a external antennas, and the default changed to internal (except
for the MAP-262) in MSS Version 3.2.