Command Reference Guide

display {ap | dap} status 289
AP model MAP access point model number.
manufacturer Company that made the MAP access point.
name MAP access point name.
Link Status of this link with the MAP access point and the MAP
port at the other end of the link. The status can be up or
down.
MAP port MAP port number connected to this WX port.
State State of the MAP:
 init — The MAP has been recognized by the WX but has
not yet begun booting.
 booting — The MAP has asked the WX for a boot
image.
 image downloading — The MAP is receiving a boot
image from the WX.
 image downloaded — The MAP has received a boot
image from the WX and is booting.
 configuring — The MAP has booted and is ready to
receive or is already receiving configuration parameters
from the WX.
 operational — The MAP has received configuration
parameters for one or more radios and is ready to accept
client connections.
 configure failure — One or more of the radio
parameters received from the WX is invalid.
For Distributed MAPs, this field also indicates whether the
MAP’s management traffic with the WX is encrypted, and
whether the MAP’s fingerprint has been verified on the
WX:
 not encrypted—The management session is not
encrypted.
 encrypted but fingerprint not verified—The MAP’s
management traffic is encrypted, but the MAP’s
fingerprint has not been verified in MSS.
 encrypted and verified—The MAP’s management
traffic is encrypted and the MAP’s fingerprint has been
verified in MSS.
Table 57 Output for display ap status (continued)
Field Description