Command Reference Guide

280 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
 set {ap | dap} group on page 313
 set {ap | dap} name on page 315
 set {ap | dap} upgrade-firmware on page 328
 set {ap | dap} radio mode on page 323
 set {ap | dap} radio antennatype on page 315
 set {ap | dap} radio channel on page 320
 set {ap | dap} radio radio-profile on page 324
 set {ap | dap} radio tx-power on page 325
display {ap | dap}
counters
Displays MAP access point and radio statistics counters.
Syntax — display ap counters [port-list [radio {1 | 2}]]
Syntax — display dap counters [dap-num [radio {1 | 2}]]
 port-list — List of ports connected to the MAP access point(s) for
which to display statistics counters.
 dap-num — Number of a Distributed MAP for which to display
statistics counters.
 radio 1 — Shows statistics counters for radio 1.
 radio 2 — Shows statistics counters for radio 2. (This option does not
apply to single-radio models.)
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Usage — To display statistics counters and other information for
individual user sessions, use the display sessions network command.
Examples — The following command shows statistics counters for an
MAP access point on port 6:
WX1200# display ap counters 6
Port: 6 radio: 1
=================================
LastPktXferRate 2 PktTxCount 91594255