Command Reference Guide

clear {ap | dap} radio 273
 radio 1 — Radio 1 of the MAP.
 radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
 radio all — All radios on the MAP.
Defaults — The clear ap radio command resets the radio to the default
settings listed in Table 51 and in Table 66 on page 342.
Access — Enabled
History —Introduced in MSS Version 3.0.
Usage — When you clear a radio, MSS performs the following actions:
 Clears the transmit power, channel, and external antenna setting from
the radio.
 Removes the radio from its radio profile and places the radio in the
default radio profile.
This command does not affect the PoE setting.
Examples — The following command disables and resets radio 2 on the
MAP access point connected to port 3:
WX1200# clear ap 3 radio 2
Table 51 Radio-Specific Parameters
Parameter Default Value Description
channel  802.11b — 6
 802.11a — Lowest
valid channel number
for the country of
operation
Number of the channel in
which a radio transmits and
receives traffic
tx-power Highest setting allowed for
the country of operation
or highest setting
supported on the
hardware, whichever is
lower.
Transmit power of a radio, in
decibels referred to
1 milliwatt (dBm)
antennatype internal
(The default for model
MAP-262 is ANT1060.)
External antenna model
Note: This parameter applies
only to MAPs that support
external antennas.