Command Reference Guide

260 CHAPTER 7: AAA COMMANDS

set web-aaa Globally enables or disables WebAAA on an WX switch.

Syntax —

set web-aaa {enable | disable}

 enable — Enables WebAAA on the switch.

 disable — Disables WebAAA on the switch.

Defaults — Enabled.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — This command disables or reenables support for WebAAA.

However, WebAAA has additional configuration requirements. For

information, see the “Configuring AAA for Network Users” chapter in

the Wireless LAN Switch and Controller Configuration Guide.

Examples — To disable WebAAA, type the following command:

WX4400# set web-aaa disable

success: change accepted.