Command Reference Guide

230 CHAPTER 7: AAA COMMANDS
However, if local appears first, followed by a RADIUS server group, MSS
ignores any failed searches in the local WX database and sends an
authentication request to the RADIUS server group.
Examples — To set the console port so that it does not enforce
username-password authentication for administrators, type the following
command:
WX4400# set authentication console * none
success: change accepted.
See Also
 clear authentication console on page 203
 display aaa on page 217
 set authentication admin on page 226
 set authentication dot1x on page 230
 set authentication last-resort on page 234
 set authentication mac on page 236
 set authentication web on page 239
set authentication
dot1x
Configures authentication and defines how and where it is performed for
specified wireless or wired authentication clients who use an IEEE 802.1X
authentication protocol to access the network through the WX switch.
Syntax —
set authentication dot1x {ssid ssid-name | wired}
user-glob [bonded] protocol method1 [method2] [method3]
[method4]
 ssid ssid-name — SSID name to which this authentication rule
applies. To apply the rule to all SSIDs, type any.
 wired — Applies this authentication rule specifically to users
connected to a wired authentication port.
 user-glob — A single user or a set of users with 802.1X network
access.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character — either an at sign (@) or a period (.). (For details, see “User
Globs” on page 26.)