Command Reference Guide

traceroute 197
 no-dns — Disabled
 port — 33434
 queries — 3
 size — 38
 ttl — 30
 wait — 5000
Access — All.
History —Introduced in MSS Version 3.0.
Usage — To stop a traceroute command that is in progress, press
Ctrl+C.
Examples — The following example traces the route to host server1:
WX4400# traceroute server1
traceroute to server1.example.com (192.168.22.7), 30 hops max, 38 byte packets
1 engineering-1.example.com (192.168.192.206) 2 ms 1 ms 1 ms
2 engineering-2.example.com (192.168.196.204) 2 ms 3 ms 2 ms
3 gateway_a.example.com (192.168.1.201) 6 ms 3 ms 3 ms
4 server1.example.com (192.168.22.7) 3 ms * 2 ms
The first row of the display indicates the target host, the maximum
number of hops, and the packet size. Each numbered row displays
information about one hop. The rows are displayed in the order in which
the hops occur, beginning with the hop closest to the WX switch.
The row for a hop lists the total time in milliseconds for each ICMP packet
to reach the router or host, plus the time for the ICMP Time Exceeded
message to return to the host.
An exclamation point (!) following any of these values indicates that the
Port Unreachable message returned by the destination has a maximum
hop count of 0 or 1. This can occur if the destination uses the maximum
hop count value from the arriving packet as the maximum hop count in
its ICMP reply. The reply does not arrive at the source until the destination
receives a traceroute packet with a maximum hop count equal to the
number of hops between the source and destination.
An asterisk (*) indicates that the timeout period expired before MSS
received a Time Exceeded message for the packet.