Command Reference Guide

190 CHAPTER 6: IP SERVICES COMMANDS
retry count=snmp-engine-id
timeout=1
Table 40 describes the fields in this display.
See Also
 clear snmp notify target on page 121
 set snmp notify target on page 162
Table 40 Output for display snmp notification target
Field Description
user Name of the SNMP user.
engineID SNMP engine ID associated with the user. For traps, the
engine ID is local. For informs, the engine ID is that of
the notification receiver.
notify profile Name of the notification profile used by the target.
security model SNMP security model:
 v1
 v2c
 usm
security type Security requirements for exchanging messages with
the target:
 unsecured—SNMP message exchanges are not
secure.
 authenticated—SNMP message exchanges are
authenticated but are not encrypted.
 encrypted—SNMP message exchanges are
authenticated and encrypted.
notify type Type of notification sent to the target:
 inform
 trap
retry count Number of times MSS will resend an unacknowledged
inform.
timeout Number of seconds MSS waits for acknowledgement of
an inform before resending the inform (if retries are
available).