Command Reference Guide

display snmp counters 187
See Also
 clear snmp community on page 121
 set snmp community on page 160
display snmp
counters
Displays SNMP statistics counters.
Syntax — display snmp counters
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — To display SNMP statistics counters, use the following
command:
WX-1200# display snmp counters
Base SNMP Stats:
input packets: 0
output packets: 0
output notifys(traps & informs): 0
input packets with bad version: 0
input packets with ASN.1 parse errs: 0
input packets silently dropped: 0
Community Stats:
input packets with bad community names: 0
input packets with bad community uses: 0
SNMPv3 Stats:
input packets with unknown security models: 0
input packets that are invalid: 0
input packets without PDU handlers: 0
input packets specifying an unavailable context: 0
input packets specifying an unknown context: 0
SNMPv3/USM Stats:
input packets with unsupported security level: 0
input packets not in time window: 0
input packets with an unknown user name: 0
input packets with an unknown engineID: 0
input packets with an authentication failure: 0
input packets with a decryption failure: 0