Command Reference Guide

display dhcp-server 185
See Also
 set interface dhcp-server on page 145
Table 38 Output for display dhcp-client verbose
Field Description
Interface VLAN name and number.
Status Status of the interface:
 UP
 DOWN
Address Range Range from which the server can lease addresses.
Hardware Address MAC address of the DHCP client.
State State of the address lease:
 SUSPEND—MSS is checking for the presence of
another DHCP server on the subnet. This is the initial
state of the MSS DHCP server. The MSS DHCP server
remains in this state if another DHCP server is
detected.
 CHECKING—MSS is using ARP to verify whether the
address is available.
 OFFERING—MSS offered the address to the client
and is waiting for the client to send a
DHCPREQUEST for the address.
 BOUND—The client accepted the address.
 HOLDING—The address is already in use and is
therefore unavailable.
Lease Allocation Duration of the address lease, in seconds.
Lease Remaining Number of seconds remaining before the address lease
expires.
IP Address IP address leased to the client.
Subnet Mask Network mask of the IP address leased to the client.
Default Gateway Default gateway IP address included in the DHCP Offer
to the client.
DNS Servers DNS server IP address(es) included in the DHCP Offer to
the client.
DNS Domain Name Default DNS domain name included in the DHCP Offer
to the client.